Scheppach AB1900 Traduction Des Instructions D'origine page 25

f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool
for operations different from those in-
tended could result in a hazardous
situation.
5. Service
a) Have your power tool serviced by a
qualified repair person using only iden-
tical replacement parts. This will en-
sure that the safety of the power tool
is maintained.
APPLIANCE-SPECIFIC SAFETY IN-
STRUCTIONS FOR HAMMERS
• Wear ear protectors. Exposure to noise
can cause hearing loss.
• Use auxiliary handle(s), if supplied with
the tool. Loss of control can cause per-
sonal injury.
• Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory contacting a "live"
wire may make exposed metal parts of
the power tool "live" and could give the
operator an electric shock.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
• Use suitable detectors to determine if
utility lines are hidden in the work area
or call the local utility company for as-
sistance. Contact with electric lines can
lead to fire and electric shock. Damaging
a gas line can lead to explosion. Pen-
etrating a water line causes property
damage or may cause an electric shock.
• When working with the machine, always
hold it firmly with both hands and pro-
vide for a secure stance. The power tool
is guided more secure with both hands.
• Secure the workpiece. A workpiece
clamped with clamping devices or in a
vice is held more secure than by hand.
• Wear a dust mask.
ADDITIONAL SAFETY AND WORKING
INSTRUCTIONS
WARNING
• Do not overreach. Keep proper footing
and balance at all times.
• Use protective equipment. Always wear
safety glasses when working with the
machine. The use of protective clothing
is recommended, such as dust mask,
protective gloves, sturdy non-slip foot-
wear and ear defenders.
• The dust produced when using this
tool may be harmful to health. Do not
inhale the dust. Use a dust absorption
system and wear a suitable dust pro-
tection mask. Remove deposited dust
thoroughly, e.g. with a vacuum cleaner.
• Always keep the connection cable from
the working area of the device. Always
guide the cable backwards, away from
the device!
GB | 25