aquabrass cut 39529 Guide D'installation page 7

cut 39529
wallmount lavatory faucet
robinet de lavabo mural
CARE & MAINTENANCE
Do not allow water residues to come into prolonged contact with the surface finish. After each use, gently dry the product
surface with a clean soft cloth to prevent water-spotting and mineral build-up. Water stains and accumulation of minerals
weaken the protective coating, eventually leading to peel off.
Clean the surface regularly using a pH neutral clear liquid soap, water and a soft cloth. Rinse away any traces of soap and
gently dry with a soft clean cloth. Occasional application of Flitz Faucet Wax Plus is also recommended. The application of
this wax based product leaves a protective layer that repels water, thereby providing extra protection against tarnishing.
Avoid abrasive and harsh cleaning products (detergents, caustic, acidic, antibacterial, ammonia- or bleach-containing
products, organic solvents, lime scale and clog removers, brass and silver cleaners, etc.). The use of these products can
damage the finish and will void the warranty. We recommend covering the fixture with a towel when using any of the listed
products in order to prevent damage by splashing.
Residues left by personal products such as soap, toothpaste and shampoo can damage the finish. Always rinse these
residues away with clean water and wipe dry.
Due to the characteristics of the Aquabrass custom finishes and their appropriate maintenance durability dependency,
The warranty for custom finish products is three (3) years. There are no returns on custom finish products.
PRODUC T CERTIFICATION
Complying with North American plumbing standards and guaranteeing environmental products of the highest quality is our
top priority.
7 aquabrass.com
last revision: 08/27/2019