Publicité
Les langues disponibles
Les langues disponibles
Page 4
Attach the unit inside AXIS T97A10 enclosure by hanging it on the two internal screws. Tighten the
two nuts by hand, see illustration below. Connect the unit with the appropriate cables running
through the cable glands.
Replace the lid and tighten the screws securely.
Note:
For unused cable glands, do not remove the plug and make sure that the outer ring is tightened
securely.
Using the appropriate screws for the wall material (wood
or concrete) and the weight of the unit, mount the AXIS
T97A10 enclosure on a flat surface with the cable glands
pointing downwards.
Internal screw
Cable glands
AXIS T97A10 enclosure
Nut
Publicité
