Publicité
The "LTECH" system can support
additional controls and can pilot
additional LED strip
Le systéme "LTECH" peut sup-
porter des télécommandes sup-
plémentaires et peut contrôler
des bandes DEL additionnelles
Match code:
Method 1:
Step 1. Power on the receiver, and complete
step 2 in 10 seconds
Step 2.
Long press
on the remote, the lamps
icker several times, the buzzer beep
once, match successfully
Method 2:
Step 1.
Short press the ID learning button on
the receiver, the buzzer beep once.
Step 2.
Long press
on the remote, the lamps
icker several times, the buzzer beep
once, match successfully
Wiring Diagram:
last revision: 23/11/2020
Match code:
1.
Assuming that B
match up with A.
Clear code:
Match/Clear code between remote and receiver
Clear code:
Receiver
ID learning button
CV Power Supply
CV Power Supply
5-24Vdc
Match/Clear code between remotes
2.
Short press the
bottom two keys of
B simultaneously,
the indicator light
keeps on after
release
Press the bottom two keys of B simultaneously
(about 6 seconds) until the indicator light
keeps on, deactivated the matching
successfully
Method 1:
Power on and o the receiver continuously for 5
times, If the buzzer long beep and lamps icker
twice, deactivate the matching successfully
Method 2:
Long press "ID learning button" on receiver for 5
seconds, if the lamps icker twice, deactivate the
matching successfully
CV Power Supply
5-24Vdc
12
cura 957
12" x 8" recessed rainhead
tête de pluie encastrée de 12" x 8"
3.
Then press any key
on A in 5 seconds.
When the indicator
light of B turns o
match successfully
Receiver
Receiver
ID learning button
Green/Verte
Red/Rouge
5-24Vdc
Blue / Bleu
Black / Noir
or
White / Blanc
aquabrass.com
Publicité
