TP-Link RE450 V1 Guide D'installation Rapide page 11

English
Choose a location away from Bluetooth devices and other household electronics, such as cordless phone,
microwave, and baby monitor, etc., to minimize signal interference.
Enjoy!
Both extended networks share the same SSID (network name) and password as your host network.
Entertainment Adapter
The extender can be used as a wireless adapter to connect any Ethernet-only device (such as a Blu-ray player,
game console, DVR, or smart TV) to your Wi-Fi network.
First, connect the extender to your router using Option 1 or Option 2, then connect the extender to your
Ethernet-only device via an Ethernet cable.
Ethernet Connection
Smart TV
Frequently Asked Questions (FAQ)
Q1. What do I do if I cannot access the extender's web management page ?
A1. Make sure your computer is connected to the Extended network SSID or connect your computer to the
extender using an Ethernet cable.
A2. Change the computer's fixed IP address to Obtain an IP Address Automatically.
A3. Verify that http://tplinkrepeater.net is correctly entered in the web browser and press Enter.
Q2. What should I do when the
A: It depends on your router capabilities. If you are connecting to a dual-band router, but only 2.4GHz or 5GHz
LED is on, press the WPS button on the router and on the extender again to reconnect the other band.
Q3. What should I do if the
A: You may have entered the incorrect Wi-Fi password of your host network during the configuration. Please
log into the extender's web-based interface to check the password and try again.
Q4. How do I restore the extender to its factory default settings?
A. While the extender is powered on, press and hold the Reset button until all the LEDs turn on momentarily.
keep away from
Game Console Desktop
LED is on, but only one band is connected?
LED does not change to solid after completing Option 1?
8