Bang & Olufsen BeoSound 8 Mode D'emploi page 6

6
To access the connection panel,
you must remove the back
cover. Pull out the cover at the
bottom to release the locks,
then lift it off.
The approval labels are placed
behind the back cover.
Priority of connections;
1. iPod/iPhone/iPad dock
2. USB
3. AUX
This means that AUX cannot be
activated if an iPod/iPhone/iPad
is connected, or other equipment
is connected via USB
Connections
R IN L IN
AUX
Power input socket (right side)
Use the enclosed mains cord only.
Mini-USB socket
For connection to a computer.
AUX
Phono sockets for connection of,
for example, an MP3 player.
Can also be used for connection to
the AirPort Express to allow for
wireless transmission of iTunes
music to the BeoSound.
USB
For safety reasons fasten the mains
lead behind the small peg, before
running it out from the connection
panel.
Position switch (left side)
Free ... Use this setting if the
BeoSound is placed on a table
or shelf not close to a wall.
Wall ... Use this setting is the
BeoSound is placed close to the
wall, for example mounted on
the wall bracket.
Corner ... Use this setting if the
BeoSound is placed in a corner.