Hoover POWERDASH FH50700US Mode D'emploi page 16

Maintenance
Belt Maintenance
HOW TO REPLACE
1
Place new belt on motor shaft.
2
Slip brushroll through belt.
To reduce the risk of injury from moving parts, unplug before servicing.
16
3
Position non-belt side end cap
of brushroll into pocket.
4
Carefully stretch belt to locate
other end cap into pocket,
making sure that the end caps
are in their correct orientation.
CAUTION
! !
BELT PART #: 440012733 – TO BUY, VISIT HOOVER.COM
5
Replace belt covers and secure
by replacing all 6 screws.
IMPORTANT
!
Rotate brushrolls manually to make sure belt is not twisted or pinched.
*in front of wheel
!