Hoover POWERDASH FH50700US Mode D'emploi page 14

Maintenance
How to Clean Nozzle
1
To prevent possible leaking, remove
tanks from the unit.
2
Unit should be in upright position.
3
Grip the top of the nozzle and
pull up to remove. Lift the unit up
slightly to remove nozzle.
14
4
Rinse the nozzle under running
water to remove any dirt or debris.
Allow it to dry.
5
Replace the nozzle by aligning the
tabs at the bottom of the nozzle
to the foot.
6
Snap nozzle into place.