Vollrath HPI4-2600 Manuel De L'opérateur page 6

OPERATION (CONTINUED)
Set the Timer (Optional)
1. Touch .
2. The time will flash.
3. Rotate to select a time in 30 second increments.
After three seconds, timer will begin to count down and
flash to indicate the timer is in use.
4. When the timer reaches zero, a buzzer will sound and the display will
show END. Heating will stop.
Change the Duration of Time
1. Touch .
2. Then rotate to change the duration of time.
Cancel the timer
x 2
Touch .
6
will
High Power Countertop Induction Ranges with Temperature Control Probe Operator's Manual
Use the Temperature Control Probe (Optional)
The temperature control probe provides advanced temperature control.
The probe monitors the temperature of the food and then automatically
adjusts the output of the range as needed to heat the food to the
selected temperature. For best performance and food quality, stir the
food often when using the temperature control probe.
NOTE: The Temperature Control Probe is intended to provide a more
consistent and accurate cooking temperature. It is not intended to be
used as a thermometer for measuring the temperature of food.
Attach Probe and Insert into the Food
1. Use a soft clean cloth to wipe the tip of the probe. This is important
to keep the port clean and working properly.
2. Remove the cover from the temperature control probe port. Plug the
probe into port.
3. Place the probe into the center of the food. Use the included probe
clip to secure the probe to the pan and suspend it in the center of the
food. Do not allow the probe to rest on the bottom of the cookware.
For the most accurate temperature control, the probe must be
positioned into the center of the food, and not touch the bottom of
the pan.
Set the Temperature
1. Touch repeatedly until
2. Rotate to select a temperature.
Heat the Food
1. The probe icon will flash as the food heats to the set temperature.
The display shows the set temperature.
Set temperature
2. When the probe detects the food the reached the set temperature,
the probe icon will change to a steady state
Set temperature
or is selected.
Food is heating to
the set temperature.
Food has reached the
set temperature.