Parts Identification Guide - RESTEK CH4izer Manuel D'utilisation

3.0 Parts Identification Guide

• Methanizer control box
• Heater chamber (cat.# 27210)
• Catalyst tube (cat.# 27209)
• Hydrogen supply line (cat.# 27208)
• Adaptor for Shimadzu capillary FID (cat.# 23477)
• 1/8" Swagelok nut (cat.# 23151, not shown)
• Ferrules (cat.# 20215, 20219, 20220, 27067, not shown)
• Right angle wrench (cat.# 22649, not shown)
• Transition tubing (not shown)
Parts Manufactured by Restek Corporation
Methanizer control box
Recommended Related Products (Available at www.restek.com)
• Flowmeter (cat.# 22656) and FID flow measuring adaptor (cat.# 21000)
• Leak detector (cat.# 28500)
• Hi-Duty tubing cutter (cat.# 22356)
• Replacement triple gas filters (cat.# 22020)
• Filter baseplate (cat.# 22344)
• Installation kit (cat.# 27213)
• 1/8" Metering valve (cat.# 23204)
• 1/8" Stainless-steel gas supply line (10 feet) (cat.# 29026)
• 1/8" Tee (cat.# 23172)
• 1/8"–1/16" Tube end reducer (cat.# 23176)
• 1/8" Stainless-steel ball valve (cat.# 23200)
• MINICYL regulator with 1/8" stainless-steel fittings (cat.# 27215)
www.restek.com
4
Heater chamber
(cat.# 27210)
Catalyst tube
(cat.# 27209)
Hydrogen supply line
(cat.# 27208)
Adaptor for capillary FID
(cat.# 23477)