Publicité
Les langues disponibles
Les langues disponibles
the appliance. When the appliance is not used for a period of time, it should be removed from the
oven and stored in its original packaging in a dry dust free environment.
•
CAUTION: All cleaning and maintenance should be carried out when the oven is cool and with the
fuel supply turned OFF at the gas cylinder and disconnected.
•
BEFORE USE CHECK APPLIANCE AND CONNECTIONS FOR LEAKS:
Never check for leaks with a naked flame, always use a soapy water solution.
Leak testing: Leak test each time a new gas tank is connected or after a long period without having
used the appliance. Make sure that the valve is in correct alignment with the venturi. Make sure that
the hose has no cracking or splitting. IMPORTANT: if you cannot stop a gas leak, turn off the gas tank
valve and call your local gas tank dealer or fire department.
•
The appliance must be kept away from any flammable materials during use.
•
When changing the gas canister, ensure that the Ooni 3 Gas Burner FSD knob is turned to the off
position, disconnect the regulator from the gas canister and remove the canister. Throughout this
process, ensure that the canister is kept a minimum of 1 meter (3.5ft) away from the oven to avoid
ignition risks.
•
Use 6 kg to 13 kg gas tanks with a maximum height including the regulator of 570mm and a maximum
diameter including the regulator of 310 mm. In case of smell of gas, close the gas container tap and
test the airtightness.
•
Regulator and Hose Requirements:
The regulator used with your gas burner oven must be CE approved, and conform to local codes,
such as EN16129. Also the hose connected to the tank must be approved and conform to local codes.
The length of the hose shall be no excess 1.5m (For Finland, it should be no excess 1.2m)
•
If the ground temperature is above 50K, the surface needs protection.
Ø310mm
3
Publicité
