Replacing The Light Bulb - Fujioh BUF-01 Mode D'emploi

replacing the light bulb

One 40W light bulb can be installed in this range hood.
Prior to replacing the light bulb, purchase an ordinary mini-light bulb (in the base diameter
17 mm: intermediate base), rated 120V - 40W or below.
1 Unscrew the knob fixing the lamp cover
to open it.
2
Replace the light bulb with a new one.
NOTE: When replacing the bulb, wait until it
has cooled off before removing, or you
may burn your hand.
3 Fasten the knob firmly after closing the
lamp cover.
8