Replacing The Light Bulb - Fujioh BUF-01A Mode D'emploi

replacing the light bulb

One 50W halogen light bulb can be installed in this range hood.
Prior to replacing the light bulb, purchase a halogen light bulb (Bulb type MR16, GU10),
rated 120V - 50W or below.
To remove the light bulb, push and turn it counterclockwise. Then, replace the light bulb
with a new one.
NOTE:
• When replacing the bulb, wait until it has cooled off before removing, or you may burn
your hand.
• When installing the bulb, be sure to fix to the socket securely.
To remove the light bulb
Halogen lamp
8
Push the lamp,
and turn it
counter clockwise.
To install the light bulb
Halogen lamp
(MR16, GU10: 50W)
Push the lamp,
and turn it
clockwise.