Bosch GBR 14 CA Professional Notice Originale page 19

OBJ_BUCH-599-002.book Page 19 Thursday, April 22, 2010 3:59 PM
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for dry grinding, de-
burring and smoothing mainly mineral materials
(such as e.g., concrete, stone, marble and pave-
ment/plaster flooring). It is also suitable for re-
moving protective coating and adhesive residue.
The machine may be used exclusively in con-
junction with a vacuum cleaner of dust category
M.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Guard and extraction hood
2 Vacuum connection
3 Spindle lock button
4 Vacuum hose*
5 Service indicator
6 On/Off switch
7 Auxiliary handle
8 Brush collar
9 Handle (insulated gripping surface)
10 Grinder spindle
11 Mounting flange with O-ring
12 Diamand cup wheel*
Bosch Power Tools
13 Clamping nut
14 Quick-clamping nut
15 Two-pin spanner for clamping nut
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Concrete Grinder
Article number
Rated power input
Output power
Rated speed
Diamond cup wheel
diameter
Thread of grinder
spindle
Restarting Protection
Reduced starting
current
Weight according
to EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 88 dB(A);
Sound power level 99 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
3 609 929 B94 | (22.4.10)
English | 19
*
GBR 14 CA
Professional
0 601 773 7..
W 1400
W 820
-1
min 11000
mm 125
M 14
kg 2.7
/II