Klarfit Barracuda Mode D'emploi page 20

EN
20
DEVICE OVERVIEW AND FUNCTION KEYS
Conenction and battery recommendations
Recommended battery: The battery should be a 12-volt deep cycle battery
or ship battery with a minimum ampere rating of 50 amperes per hour. To
extend the operating time, an additional battery can be used.
Battery terminal
Connect with one battery (DC 12 V)
Connect the red cable to the anode (+) and the black cable to the cathode (-).
It is recommended to install a 50 amp breaker together with the red positive
wire.
Black cabl e (-ve) of the outboard
motor
Connection of two batteries in parallel connection (DC 12 V)
Connect the red wire to the anode (+) and the black wire to the cathode (-).
It is recommended to install a 50 amp breaker together with the red positive
wire..)
Black cable (-ve) ) of the outboard motor
DC12 V
Black cabl e (+ve)
of the outboard motor
Terminal output voltage:
12 V
Red cable (+ve) of the outboard motor