Stitch Selector Dial - Singer 3337 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The Stitch Selector Dial is used to select the stitch you want to sew. The dial can be turned to the left
or to the right.
For Sewing the Grey Stitch Patterns:
Stitch Length Dial
For Sewing the Blue or Red Stitch Patterns:
Stitch Length Dial
For examples of stitch patterns and further instruction, see the Stitch Reference Guide at www.
singerco.com.
Stitch Length Dial
Selector Dial
1. Turn the Stitch Selector Dial until it clicks in
place under the dot directly above the dial on
the machine.
2. Set the Stitch Length Dial according to the
length you want. It can be set anywhere
between 0.5 and 4, with 4 being the longest
setting.
1. Turn the Stitch Selector Dial until it clicks in
2. Set the Stitch Length Dial so that the S1 or S2
START SEWING

Stitch Selector Dial

Stitch
place under the dot directly above the dial on
the machine.
is lined up with the dot above this dial. This
dial must be set at the S1 marking for the blue
stitches or the S2 marking for the red stitches,
or the stitch pattern will not sew.
3
19

Publicité

Table des Matières
loading

Table des Matières