Publicité
Les langues disponibles
Les langues disponibles
OPEN
22
CLOSED
22 VALVE FUNCTION
By lifting the Lever Handle (22A) up, the valve will be activated allowing water
to flow. The water flow will increase by continuing to lift up the Lever Handle
(22A). By rotating the Lever Handle counter-clockwise, the water temperature
will decrease to cold flow only. By rotating the Lever Handle clockwise, the
water temperature will increased to hot flow only.
Note: Flush faucet before turning on valve (see step 24).
23
23B
23A
23 SIDE SPRAY OPERATION
(For 2, 3 & 4 hole installations). The Side Spray (23A) can be pulled forward
to spray water in any direction. To activate the Side Spray, press the Toggle
Button (23B) located on the back of the Side Spray (23A).
22A
HOT
22A
COLD
ENGLISH
MAINTENANCE & CARE
24
24A
24 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (24A). Lift Handle (24B)
on and allow both hot and cold water to run for at least one minute each. While
water is running, check for leaks. To clean the aerator, disassemble Aerator
Housing (24A) by separating the Aerator Shell (24C), Basket (24D), and Washer
(24E). Once parts have been cleaned, reassemble by reversing steps.
25
25A
25 TO CHANGE DECORATIVE HANDLE CAP
Carefully pry off current Handle Cap (25A). Press the new Handle Cap (25B)
into the hole in the top of the Handle (25C).
6
24B
24E
24D
24C
25B
25C
Publicité
