Publicité
Les langues disponibles
Les langues disponibles
12
12A
12B
12 SIDE SPRAY INSTALLATION
Insert the Side Spray Hose (12A) through the Hose Guide (12B). From
underneath sink, feed the Side Spray Hose (12A) back up through the center
hole of sink and through Mounting Ring (12C) so that it is above the sink.
STOP
4 HOLE INSTALLATION
13
13C
BOTTOM GROOVE
13 INSTALLING DECKPLATE
Ensure that the Plastic Putty Plate (13A) is pressed on the Deckplate (13B).
Place a bead of plumber's putty in the groove along the outer edge of the Putty
Plate (13A). If desired, place a small bead of plumber's putty to the underside
of the Hose Guide Flange (13C). Install the Deckplate (13B) and align the Hose
Guide Flange (13C) over the holes in the sink.
14
14A
14F
14B
14C
12C
Go To Step 16
13B
13A
14D
14F
14E
14E
ENGLISH
14 SECURING DECKPLATE & HOSE GUIDE
Insert Hose Guide (14A) into Hose Guide Flange (14B) and onto the sink hole.
From underneath sink, secure the Hose Guide (14A) by screwing the Plastic
Locknut (14C). Secure Deckplate (14D) by screwing Wing Nuts (14E) to
Mounting Posts (14F). Hand tighten. Caution: do not over-tighten. Remove
any excess putty from around the outside edge of Deckplate (14D).
15
15A
15B
15 SIDE SPRAY INSTALLATION
Insert the Side Spray Hose (15A) through the Hose Guide (15B). From
underneath sink, feed the Side Spray Hose (15A) back up through the center
hole of sink and through Deckplate (15C) so that it is above the sink.
16
16C
16A
16 HOSE ATTACHMENT
Carefully tighten the Side Spray Hose (16A) to the Spray Supply Tube (16B)
located on the back of the Faucet Body (16C).
4
15C
16B
Publicité
