ResMed AirSense 10 Manuel De L'utilisateur page 3

ENGLISH
Thank you for choosing a ResMed oximeter adapter.
Intended use
The oximeter adapter connects a NONIN Xpod
data (oxygen saturation and pulse rate) is recorded on the SD card inserted into
the device.
The Air10 oximeter adapter shown in illustration A is compatible with
AirSense 10 / AirCurve
™
in illustration B is compatible with S9 devices.
The oximeter adapter is intended for home and hospital use.
Read the entire guide before using the oximeter adapter.
Air10 oximeter adapter
Refer to illustration A:
1. Adapter connector
2. Release button
3. Oximeter port.
10 / Lumis devices. The oximeter adapter shown
™ ™
oximeter to your device. Oximetry
™
S9 oximeter adapter
Refer to illustration B:
1. Oximeter port
2. Release buttons
3. Adapter clip
4. Adapter connector.
English 1