Skil PWRCORE 20 SC5358B-02 Guide D'utilisation page 13

Charger Error
If the charger self-inspection fails to react when the charger is plugged in, the causes include
no power to the charger, bad contacts, or a charger failure. Check to see if the charger self-
inspection can be activated when the charger is plugged in again or plugged into a different
outlet. If it still fails, have the charger serviced by an Authorized SKIL Service Station.
Battery Pack Error
If the charger detects a problem, the red Error Indicator will begin flashing. Remove and re-
insert the battery pack in the charger. If the Error Indicator still flashes, try charging a different
battery pack.
a. If a different battery pack charges normally, have the first failed battery pack serviced by an
Authorized SKIL Service Station.
b. If a different battery pack also fails to charge, the problem may be with the charger. Have
the charger serviced by an Authorized SKIL Service Station.
Wall-Mount Holes (Fig .4)
The charger has hanging holes for convenient
storage. Install screws in the wall 5.9 inches
(150mm) apart. Use screws sufficiently strong
to hold the combined weight of the charger and
two battery packs.
Fig. 4
Hanging Holes
13