Troubleshooting
Symptom
Food remains on
dishes.
Dishes are not dried
well.
64
English
DW7500RM_DD81-02968A-04_EN.indd 64
Possible cause
An incorrect cycle was
selected.
The filters are clogged or not
correctly fastened.
An insufficient amount of
detergent was used.
The water pressure is low.
The nozzles are clogged.
Dishes improperly loaded or
overloaded.
The water is too hard.
There is no rinse aid in the
dispenser, or not enough rinse
aid was used.
Too many dishes are loaded.
Glasses and cups spilled water
onto other dishes while being
unloaded.
Multiple detergent tablets were
used without selecting the
Sanitize option.
Action
• Select a cycle according to
the soil level of the dishes
as instructed in this manual.
• Clean the filters.
• Make sure the filters are
correctly fastened.
• Use the correct amount of
detergent for each load.
• Make sure the pressure is
between 0.04-1.0 Mpa.
• Clean and unclog the
nozzles.
• Arrange the dishes so
they do not interfere with
the nozzles and/or the
detergent dispenser.
• Check the salt refill
indicator, and refill with
dishwasher salt.
• Add rinse aid.
• Check the rinse aid settings.
• Overloading may reduce
the drying performance.
Load your dishes as
recommended.
• Empty the lower rack
first, and then the upper
rack. This will avoid water
dripping from the upper
rack onto the dishes in the
lower rack.
• Select the Sanitize option or
use rinse aid.
2021-09-01
10:33:43