OHAUS Navigator NV222 Guide De Démarrage Rapide page 2

TM
Navigator
2. UNPACKING
Carefully remove your balance and each of its components from the package. Store the
packaging material to ensure safe storage and future transport.
Included Components:
 Balance
 Quick Start Guide
3. PREPARATION FOR USE
Step-1 Selecting the location
Place on a firm, steady surface with
sufficient space. Avoid excessive
air current, vibrations, heat
sources, or rapid temperature
changes
Step-2 Transportation Lock
The Transportation Lock is located
under the balance. Rotate the
pointer to the unlocked position.
Note: No shipping lock on
Approved models
Step-3 Connect Power
Connect the AC adapter to the
balance input jack.
Battery installation
Install the four "C" batteries (not
included) with polarity as shown in
the battery compartment.
Step-4 Leveling the Equipment
To level the instrument, adjust the
feet/leveling wheel so the bubble is
centered in the circle of the level
indicator. Be sure the equipment is
level each time its location is
changed.
Note:
After power on, it is recommended to warm up the balance for at least 5 minutes before
using it.
TM
Navigator
 Pan
 Warranty Card
2
Quick Start Guide
 AC Adapter & Plug
Locked
position
Input Jack
Battery
Cover
Ohaus Corporation www.ohaus.com
Unlocked
position