APLIC 302656 Manuel page 27

Clock (CLOCK)
The current time in 12 or 24 hour mode is displayed here.
Stop watch (STPWATCH)
Press the "SET" button to start or stop the stopwatch. The stopwatch
is reset if you press and hold the "SET" button for 3 seconds. This
function works only in the stopwatch mode.
Ride time (RTM)
Records the ride time since the last reset and shows this in the
display.
Distance covered (TRIPDIST)
The distance covered since the last reset is recorded here and shown
in the display.
Ride time (RIDETIME)
The current ride time since the last reset is shown in the display in
this mode. The time stops as soon as you interrupt your ride and
continues again once you resume riding.
Maximum speed (MAX SPEED)
The maximum speed since the last reset is recorded here and shown
in the display.
Average speed (AVGSPEED)
This mode records the average speed since the last reset and shows
this in the display. The average speed is calculated using the distance
covered and dividing it by the ride time.
Trip up/down (TRIP up / down)
Press the "SET" button for 2 seconds in "TRIP" mode to select the
mode between increment (up) or decrement (down). Confirm the
entry using the "Mode" button.
Total distance covered (TOT DIST)
This mode shows the total distance covered in kilometres. The total
27
English