Troubleshooting - Briggs & Stratton 71035 Manuel D'installation Et D'utilisation

Troubleshooting

Problem
Su pervised loads (air conditioner,
etc.) are not operating when
generator is supplying power
No power to power management
system when generator is
running.
14
Cause
1. Load1 – Load4 contactors not
operating correctly.
2. Too much load on generator.
3. Current transformer not connected.
4. Broken current transformer.
5. Status LED stays lit constantly.
Blown fuse in transfer switch.
Correction
1. Contact an authorized service center.
2. Decrease load to generator.
3. Contact an authorized service center.
4. Contact an authorized service center.
5. Contact an authorized service center
Contact an authorized service center.
BRIGGSandSTRATTON.COM