Publicité
Les langues disponibles
Les langues disponibles
STEP 4 – Mat on frame assembly
When attaching the springs to the trampoline mat, be careful. 2 adults required.
CAUTION: During the attachment of the springs, the frame connection points are tightening: Pinch hazard.
A.
Place the jump mat in the middle of the frame
B.
In total on the trampoline, there are:
These parts are not numbered:
Follow the instructions below
C.
Select an arbitrary point on the frame (called ZERO). First, fix the spring (7) in a V-ring jump mat, hook down.
Then use the special tool to pull the spring and insert it in the hole (following picture below). Keep landmark, the point
ZERO for the next steps.
Special springs tool use
(1) Wear heavy work gloves to protect your hands.
(2) Use the special tool spring included.
(3) Hook the spring into the V ring. Align the ring, the spring and the frame hole.
(4) Pull the spring hook with the tool as shown.
Place the hook in the hole of the frame until it clicks by pressing the spring hook.
D.
Then count the frame holes following the table against
and count the same amount for the V-ring:
Hang a new spring at this point.
Springs
JOU121
36
JOU076
48
JOU122
48
JOU077
60
JOU078
72
JOU079
88
25
V Rings
JOU121
36
JOU076
48
JOU122
48
JOU077
60
JOU078
72
JOU079
88
JOU121
JOU076
JOU122
JOU077
JOU078
JOU079
Frame holes
JOU121
36
JOU076
48
JOU122
48
JOU077
60
JOU078
72
JOU079
88
12
12
12
15
18
22
Publicité
