Owner's Manual
Connect the Wheel Deflector Ring
The wheel deflector ring can be used to help direct
the T5 Duo around steps and other obstacles
in the pool. Attach the wheel deflector ring just above
the first hose cuff.
To attach, insert the end of the cleaner hose through
the outer ring and push the C-clip over the hose.
Connect the Cleaner
To avoid serious injury, turn off the suction pump for the cleaner before performing this step.
1. Submerge the cleaner and flood it with
water.
2. When bubbles stop coming out of the cleaner,
connect the hose to the cleaner by pushing the
quick connector onto the outer extension pipe
until it locks into position with a clicking sound.
3. Allow the cleaner to drift to the bottom of the
pool. Turn on the pool pump to begin cleaning.
Installation is complete.
|
Zodiac
®
T5 Duo
®
Suction-Side Pool Cleaner
WARNING
ENGLISH
Page 7