Installation; Generator Owner Responsibilities; Installing Dealer/Contractor Responsibilities; Delivery Inspection - Generac GEN10AD Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation

Equipment Description
This product is intended for use as an optional residential
generator system which provides an alternate source
of electric power and to serve loads such as heating,
refrigeration systems, and communication systems that,
when stopped during any power outage, could cause
discomfort or inconvenience. This product does not qualify
for emergency standby as defined by NFPA 70 (NEC).

Generator Owner Responsibilities

• Read and follow the instructions given in the Operator's
Manual, especially the section regarding selecting
essential circuits.
• Follow a regular schedule in maintaining, caring for
and using your residential generator, as specified in the
Operator's Manual.

Installing Dealer/Contractor Responsibilities

• Read and observe the safety rules.
• Install only an UL approved transfer switch that is
compatible with the residential generator.
• Read and follow the instructions given in this
Installation and Start-up Manual.
IMPORTANT: If operating the generator below 40°F, it is
recommended that a battery and oil warmer be installed. If
operating the generator below 32°F, a battery and oil warmer
must be installed. Both items are available at your local
servicing dealer.
If you need more information in this matter, please call
(877) 369-9400, between 8:00 AM and 5:00 PM CT.
Unpacking Precautions
The unit is shipped bolted to its mounting pad, ready
for installation. Avoid damage from dropping, bumping,
collision, etc. Store and unpack carton with the proper side
up, as noted on the shipping carton.
CAUTION
Installing the 15A fuse could cause the engine
to start.
Observe that the 15 Amp fuse has been removed from
the control panel for shipping.
DO NOT install this fuse until all plumbing and wiring has
been completed and inspected.

Delivery Inspection

After removing the carton, carefully inspect the residential
generator for any damage that may have occurred
during shipment.
IMPORTANT: If loss or damage is noted at time of
delivery, have the person(s) making delivery note all
damage on the freight bill and affix his signature under the
consignor's memo of loss or damage. If loss or damage is
noted after delivery, separate the damaged materials and
contact the carrier for claim procedures. Missing or damaged
parts are not warranted.

Shipment Contents

The residential generator is supplied with:
• Generator
• Pre-attached mounting pad
• One flexible hook-up pipe
• Battery
• This installation and start-up manual
• Operator's manual
• Installation checklist
• Oil drain tray
• Touch up paint
• One spare 15A fuse
• Roof hardware bag
• 2 Pole connector - 240V from house
• 10 Pole connector - Sensing and control wires
• Remote LED indicator kit (red LED/plate/screws)
7

Publicité

Table des Matières
loading

Table des Matières