General Safety - MasterCraft 62-3569-2 Guide D'utilisation

Pompe tout usage immergée d'entrepreneur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety

GENERAL SAFETY

Electrically powered utility pumps normally give many
years of trouble-free service when correctly installed,
maintained, and used. However, unusual circumstances
(interruption of power to the pump, dirt/debris, flooding
that exceeds the pump's capacity, electrical or mechani-
cal failure in the pump, etc.) may prevent your pump
from functioning normally. To prevent possible water
damage due to flooding, consult your retailer about a
secondary AC pump, a DC backup pump, and/or a high
water alarm. See the "Troubleshooting Chart" in this
manual for information about common pump problems
and remedies.
For more information, call customer service at
1-877-455-5508.
1. Know the pump application, limitations, and poten-
tial hazards.
Do not use in explosive atmospheres.
Pump water only with this pump. Failure to follow
this warning can result in personal injury and/or
property damage.
2. Make certain power source conforms to requirements
of your equipment.
3. Disconnect power before servicing.
4. Release all pressure within system before servicing
any component.
5. Drain all water from system before servicing.
6. Secure discharge line before starting pump. An unse-
cured discharge line will whip, possibly causing per-
sonal injury and/or property damage.
7. Check hoses for weak or worn condition before each
use, making certain all connections are secure.
8. Periodically inspect pump and system components.
Keep pump and system free of debris and foreign
objects. Perform maintenance as required.
9. Provide means of pressure relief on pumps whose dis-
charge line can be shut-off or obstructed.
10. Personal Safety:
a. Wear safety glasses at all times when working
with pumps.
b. Keep work area clean, uncluttered and properly
lighted; replace all unused tools and equipment.
c. Keep visitors at a safe distance from work area.
d. Make workshop child-proof with padlocks, master
switches, and by removing starter keys.
11. When wiring an electrically driven pump follow all
electrical and safety codes, as well as most recent
Canadian Electrical Code or Quebec Electrical Code
requirements.
For parts or assistance, call customer service at
Pump motor is equipped with an auto-
matic resetting thermal protector and may restart
unexpectedly.
12.
Risk of electric shock. This equipment
is only for use on 115 volt (single phase) and is
equipped with an approved 3-conductor cord and
3-prong, grounding plug.
To reduce risk of electric shock, be cer-
tain that it is connected to properly grounded,
grounding-type receptacle.
Replace a 2-prong wall receptacle with properly
grounded 3-prong receptacle installed in accordance
with the Canadian Electrical Code, the Quebec
Electrical Code and local codes and ordinances.
13. All wiring should be performed by a qualified
electrician.
14. Protect electrical cord from sharp objects, hot sur-
faces, oil and chemicals. Avoid kinking cord. Replace
or repair damaged or worn cords immediately.
15. Use wire of adequate size to minimize voltage drop
at motor. Refer to most recent Canadian Electrical
Code or Quebec Electrical Code.
16. Do not touch an operating motor. Modern motors are
designed to operate at high temperatures.
SPECIFICATIONS
Power supply required ...............................115 V, 60 Hz.
Motor duty .....................................................Continuous
Maximum Liquid Temperature .......................77°F (25°C)
Operation Position ...............................................Vertical
Individual Branch Circuit Required .........................15 A
Operating Depth
Beginning min .......1/2" (12.7 mm)
(water level)
Ending max............3/16" (4.7 mm)
Discharge ...............................................1" NPT (25 mm)
DESCRIPTION
Submersible pump is designed for water removal in
home applications. Pump can be used for emergency
service and dewatering. Unit is constructed of hi-impact
corrosion-resistant plastic. Screened inlet prevents large
solids from entering pump.
PERFORMANCE
GPH (LPH) AT TOTAL FEET (M)
3'
5'
10'
(0.91)
(1.52)
(3.05)
1600 gal 1524 gal 1260 gal 924 gal
(6 056 L) (5 768 L) (4 769 L) (3 497 L) (2 452 L) (1 408 L)
1-877-455-5508
15'
18'
20'
(4.57)
(5.49)
(6.09)
(6.70)
648 gal
372 gal
0 gal
(0 L)
3
22'

Publicité

Table des Matières
loading

Table des Matières