Installation
Please do not place your iPhone® or iPod touch® into
the GPS Car Kit until instructed to do so.
Assembling
Assemble the GPS Car Kit as shown. Do not tighten the
retaining ring.
Retaining Ring
Cradle Holder
Press the release button and raise the retaining arm all
the way to the top.
Inserting your iPhone into the GPS Car Kit
Slide your iPhone or iPod touch into the connector on
the bottom of the GPS Car Kit and then gently push
your iPhone or iPod touch towards the GPS Car Kit.
Press the release button and push down on the
retaining arm to lock your iPhone or iPod touch in
place.
Checking for an uneven gap
The gap between the iPhone or iPod touch and the GPS
Car Kit should be even. If it is uneven, you can slide the
adjustment switch on the back to push out the
adjustment block until the gap at the top is the same as
the gap at the bottom.
4
en