VANTRUE OnDash N2 Pro Mode D'emploi page 15

-Time Lapse: Default is OFF. Press DOWN followed
by OK to set time interval: 1 Sec, 5 Sec, 10 Sec,
30Sec, 1Min, Off.
-Power Off Delay: Default setting is ON, forcing the
camera to automatically end recording and turn
off after you power down the car. Press OK and
DOWN button to toggle it OFF/ON.To finish setup,
press the MENU button to exit.
B. System Setup
-Language: Default is English. Press OK to select
between English, Simplified Chinese, German,
Japanese, Spanish, French, and Italian.
-Format memory Card: Press OK, navigate DOWN
and select OK to format the microSD card.
-Time & Date: Press UP/DOWN and OK button to set
the current date and time. Press the MENU button
to exit.
-Auto LCD Off: If you choose 3 Min, it will turn off the
camera screen 3 minutes after recording
commences. If you choose OFF, the screen will
always stay on. Press the OK button to select the
duration in minutes: 1, 3, 5, or OFF to disable it.
-Device Sound: Default is ON. Press the OK button
to toggle it ON/OFF.
-Non-use Auto Power OFF: A default setting of 3 MIN
means the camera is ON but not in use, it will auto
turn OFF after 3 minutes of inactivity. Press OK to
choose between 1, 2 minutes or 3 minutes, or OFF
to disable this feature.
-Flicker Frequency: Press OK to toggle between
- 14 -