Télécharger Imprimer la page

Sanitaire 6093 Serie Guide De L'utilisateur page 6

Publicité

1618809_6093WideTrack.qxp_Layout 1 8/15/19 7:32 PM Page 6
Brush height adjustment
ENGLISH
• This machine has 5 brush height adjustment levels.
• To lower the brush, depress to lower pedal and release one
notch of the ratchet at a time until the desired height is reached
(Fig. 1).
• To raise the brush, depress the top pedal (Fig. 2).
• When the machine is not in use, always place the nozzle in the
up position to lift the brush bristles off of the floor to prevent
damaging the brush bristles.
Operation of vacuum
• Plug the power cord into a properly grounded power outlet.
• To turn ON the machine, press the ON / OFF switch to the
ON position (Fig. 3).
NOTE: "O" is the international symbol for "OFF" and "l" is the
symbol for "ON."
• Squeeze the brush start trigger to activate both the brush and
the vacuum (Fig. 4).
• Adjust the brush height for proper pick-up.
Circuit breaker
Your new machine comes equipped with a 15 amp manual circuit
breaker (Fig. 5). If the machine does not turn on, you will need to
check the circuit breaker.
To reset the circuit breaker:
• Unplug the power cord from outlet.
• Check the machine for the following:
Full bag, obstructions, clogged brush, brush height
set too low.
• Press the circuit breaker button to reset.
• Plug the power cord into outlet.
• Resume operation.
6
Fig. 1
Fig. 2
Fig. 3
OFF (O)
APAGADO (O)
« ARRÊT » (O)
ON (I)
ENCENDIDO (I)
« MARCHE » (I)
Fig. 4
Switch
Interruptor
Interrupteur
Brush start triggers
Accionadores de inicio del cepillo
Gâchettes de démarrage de la brosse
Fig. 5

Publicité

loading

Ce manuel est également adapté pour:

Sc6093a