Publicité
1618809_6093WideTrack.qxp_Layout 1 8/15/19 7:32 PM Page 10
How to maintain
ENGLISH
After each use, carefully wrap power cord and place it on the cord hanger and check cord for wear or
damage. If cord is damaged, have the cord replaced by an authorized service center immediately.
Problem solving
Make sure machine is turned off and electrical power cord is unplugged.
Problem
The vacuum cleaner
does not turn on.
The brush does
not rotate.
There is loss of
vacuum suction.
Vacuum cleaner
does not pick up.
10
Cause
1) The circuit breaker has tripped.
2) Plug is broken or has loose contact.
3) Branch circuit breaker has tripped.
1) Broken brush belt.
2) Brush obstruction.
1) Vacuum inlet blocked.
2) Defective motor.
1) Strings / threads wrapped around brush.
2) Brush obstruction.
Solution
1) Reset circuit breaker.
2) Replace cord.
3) Find circuit breaker box and reset.
1) Replace belt.
2) Clear obstruction.
1) Visually inspect and clear blockage.
2) Replace motor.
1) Remove strings / threads.
2) Clear obstruction.
Publicité
