Volume Control - Smart series ARWH4804 Manuel D'exploitation

VOLUME CONTROL

This heater allows you to control the volume of the indicator beep. To do so,
follow these instructions.
1. Make sure the display is OFF.
2. Simultaneously touch the POWER
either a 2, 1 or 0 is displayed. 2= HIGH , 1= LOW, 0= OFF.
3. Press the UP
(HIGH), 1 (LOW) or 0 (OFF).
4. After the desired volume is set, touch the POWER
button to exit the volume adjustment menu; OR do not touch any button for
30 seconds to lock in your selection.
button or DOWN
button and MODE
button to make a selection between 2
button until
button or MODE
17