Hold Mode Or Vacation Mode - Smart series ARWH4804 Manuel D'exploitation

HOLD MODE OR VACATION MODE

(Also useful for freeze protection)
Touch MODE button once to activate the display and touch the MODE
button again until the HOLD indicator appears. Touch the UP button or the
DOWN button to select the desired temperature. The HOLD indicator will
flash for 3 seconds. After 3 seconds, the heater will enter HOLD mode. In order
to exit out of the HOLD mode, the user has to press the MODE button.
NoTe: During HOLD mode, default settings along with the automatic rotation
of the 4 periods will be disabled. The heater will operate from the current setting,
where the setpoint can be adjusted.
NoTe: The last setting from the HOLD mode is not saved after exiting.
12