Fan Only Operation (No Heat) - Smart series ARWH4804 Manuel D'exploitation

FAN ONLY OPERATION
This heater can also be used as a FAN ONLY device. Heat will not be generated,
but the ventilator fan will operate to circulate the air.
1. Touch the MODE
flash.
2. Use the UP
speed.
NOTE: The fan icon will flash for 3 seconds. After 3 seconds, the heater will en-
ter Fan Only mode. Touching the MODE
to another operation.
16
(No Heat)
button until you see the FAN
button or DOWN button to increase or decrease the fan
button again will switch the heater
icon illuminate and