Ready, Set, Go Programming - Smart series ARWH4804 Manuel D'exploitation

Ready, Set, Go Programming

NoTe: You can customize ON and OFF times and temperature for two
categories, Weekdays (MON - FRI) and Weekends (SAT & SUN). Each category
has 4 settings.
Wake-Up
Set a start time and temperature for each period.
1. To start setup, simultaneously touch and hold the POWER
MODE button for 1.5 seconds. MON through FRI will display with the
hour and
2. Touch MODE
. Touch either the UP
for start time.
3. Touch MODE
(Wake-Up). Touch the UP
minute for the start time.
10
Daytime
. This is your Wake-Up time.
button once to start programming the HOURS for
button again to program the MINUTES for
Evening
button or the DOWN
button or DOWN
Sleep
button and
button to set the hour
button to set the