Indoor Temperature And Humidity; Outdoor Temperature And Humidity; Weather Forecast - Alecto WS-3400 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.3 Indoor temperature and humidity:

2
IN
HI AL
LO AL
1
HI AL
LO AL

4.4 Outdoor temperature and humidity:

5
6
OUT
HI AL
LO AL
1
2
3
4
HI AL
LO AL
no sensor
When the signal from the outdoor unit is lost for 15 minutes, the measurement values -- are displayed.
If the signal from the outdoor unit is not restored within 1 hour, "Er" appears in the display.
After 48 hours the indoor unit must be re-registered by removing and replacing the batteries or by press-
ing the "SCAN" button.

4.5 Weather forecast:

sunny
partly cloudy
Remarks:
The accuracy of a weather forecast based on air pressure is 70% to 75%; attention, a correct weather
forecast cannot be guaranteed.
The weather forecast is based on the coming 24 ~72 hours and does not necessarily represent the
actual situation.
The prediction 'snow' is based on air pressure combined with the temperature; when the forecast is in
fact 'rain' but the outdoor temperature is below -3°C (26°F), then 'snow' will be expected.
1.
Temperature indoors
3
2.
Appears when the max. or min. alert is set
3.
Trend indicator (higher/equal/lower
4.
Relative humidity indoors
2
3
4
1.
Channel setting (when using multiple external Thermo /Hygro
sensors (not available))
2.
Low battery indicator outdoor unit
7
3.
Scan indicator (only when using multiple external sensors)
4.
Indication that the 3 in 1 outdoor sensor is displayed. (Press the
8
5.
Reception strength indicator outdoor unit
6
6.
Appears when the max. or min. alert is set
7
7.
Trend indicator (higher/equal/lower
9
8.
Temperature display outdoors
9.
Relative humidity outdoors
searching for con-
tact with sensor
cloudy
button to switch between 1, 2, 3 and the outdoor unit
good reception
average reception
rainy
51
,
and
)
,
and
)
no reception
storm (flashing)
)
snow

Publicité

Table des Matières
loading

Table des Matières