Publicité
Les langues disponibles
Les langues disponibles
PLAYING TRACKS REPEATEDLY, INTRO OR IN RANDOM ORDER - MODE
1. Press MODE repeatedly during playback to select:
➢
: The current track played repeatedly.
➢
ALL : The entire disc is played repeatedly.
➢
: The entire MP3 disc folder is played repeatedly
➢ INTRO : The entire disc is played the first 10 seconds.
➢
: All tracks of the disc are played in random order once.
2. To return to normal playback, press MODE repeatedly until
,
ALL,
With a conventional portable MP3-CD player you might have
experienced that the music stopped e.g. when you were
jogging.
The ESP prevents loss of sound caused by light vibrations and
shocks. Continuous playback is ensured. However it does not
protect the unit against any damage caused by dropping.
In this set ESP is default "ON". It is possible to set ESP off in audio CD playback (ESP is
always on in MP3 playback).
Press ESP button to deactivate ESP function - ESP disappears.
Press ESP button again to activate ESP function - ESP is displayed.
You can interrupt playback and continue from the position
where playback stopped (RESUME).
1. Set the OFF-RESUME-HOLD slider to RESUME position
to activate RESUME. RESUME is shown.
2. Press
in once whenever you want to stop playback and
switch the unit off.
3. Press
to resume playback, the playback continues from where you have stopped.
➢ To deactivate RESUME, set the slider to OFF position. - RESUME goes off.
Note:
If open and close the CD lip during playback, RESUME function is also activated.
RESUME becomes reset by changing the CD.
You can lock the buttons of the set. When a key is pressed, no
action will be executed. With HOLD activated, you can avoid
accidental activation of other functions.
1. Switch the slider to HOLD to activate HOLD.
All buttons are locked, HOLD is shown when you press
any button.
2. To deactivate HOLD, switch the slider to OFF.
,INTRO and
disappear.
ESP (Electronic Skip Protection)
RESUME
HOLD
CD9220 / English Instruction Manual
7
Publicité
