SOUNDMASTER CD9220 Mode D'emploi page 16

Press the XBASS button repeatedly to enable or disable a strong bass
enhancement.
You can hear the bass different from the earphone.
With this set you can play
-all pre-recorded audio CDs
-all finalized audio CDRs and CDRWs
-MP3-WMA-CDs (CD-ROMs with MP3/ WMA files)
1. Push the OPEN
2. Insert a disc, printed side up, by pressing gently on the disc's center so that it fits onto
the hub. Close the CD lid by pressing it down.
3. Press to switch the unit on.
"----"
are displayed briefly when reading the contents of the disc.
Press again to start playback. For audio CD tracks, the current
track number and the elapsed playing time are displayed.
4. Press to stop playback.
The total number of tracks and the total playing time of an audio disc are displayed.
The total number of albums and tracks of MP3/WMA-CD are displayed.
5. To remove the disc, hold it by its edge and press the hub gently
while lifting the disc.
6. Press again to switch off the player
Notes:
- After press it may take some time to read the disc until the first MP3 track is played.
- The set switches off automatically after 60 seconds, if no control is operated in the
stop mode.
PLAYING ENHANCED MUSIC CDS AND MIXED MODE CDS
On enhanced music CDs and mixed mode CDs, there are audio CD tracks as well as MP3
files.
- All audio CD tracks normally placed in album 1 or the last album number.
- When audio CD tracks are played, the display shows the album number, track number,
elapsed time, but no MP3 is displayed.
- When MP3 files are played, the display shows the album number, track number,
elapsed time and MP3 icon.
- When WMA files are played, the display shows the album number, track number and
elapsed time.
Note: Enhanced music CD and mixed mode CD containing computer data (text file, picture)
are not recommended in order to allow the set to play audio CDs and Mp3 files correctly.
VOLUME
Adjust the volume by using VOL
SOUND ADJUSTMENT
PLAYING A DISC
slide to open the CD lid.
5
CD9220 / English Instruction Manual
.