What Is What - Hitachi Koki CS 33EDP Mode D'emploi

WHAT IS WHAT?

1. Throttle lever: Device activated by the operatorʼs fi nger, for
controlling the engine speed.
2. Throttle lever lockout: Device that prevents the accidental
operation of the throttle lever until manually released.
3. Stop switch: Device for allowing the engine to be started or
stopped.
4. Oil tank cap: For closing the oil tank.
5. Recoil starter: Pull handle to start the engine.
6. Front handle: Support handle located at or towards the front of
the engine housing.
7. Fuel tank cap: For closing the fuel tank.
8. Rear handle: Support handle located at or towards the rear of the
engine housing.
9. Choke lever: Device for enriching the fuel/air mixture in the
carburetor, to aid starting.
10. Priming pump; Device for supplying extra fuel, to aid starting.
11. Guide bar: The part that supports and guides the saw chain.
12. Saw chain: Chain, serving as a cutting tool.
13. Chain brake (Front hand guard): Device for stopping or locking
the chain.
14. Chain catcher: device for restraining the saw chain.
15. Air fi ler cover: Cover for air fi lter and carburetor.
16. Side case: Protective cover to the guide bar, saw chain, clutch
and sprocket when the chain saw is in use.
17. Tension adjustment bolt: Device, often acting on the guide bar,
for adjusting the saw chain tension.
18. Chain oil adjusting screw: Device for adjusting the delivery of
saw chain oil to the guide bar and the saw chain.
19. Muffl er: Reduces engine exhaust noise and directs the exhaust
gases.
20. Anti-vibration spring: Reduce the transmission of vibrations to
the operator's hands.
21. Anti-vibration rubber: Reduce the transmission of vibrations to
the operator's hands.
22. Chain bar clamp nut: Secures the side case and the guide bar.
23. Spiked bumper: Device for acting as a pivot when in contact with
a tree or log.
24. Guide bar cover: Device for covering the guide bar and saw
chain when the unit is not being used.
25. Combi box spanner: The tool for removing or installing a spark
plug and tensioning the saw chain.
26. Handling instructions: Included with unit. Read before operation
and keep for future reference to learn proper, safe techniques.
27. Hot surface caution label: Label for caution to hot surface.
23
24
7
4
20
18
27
15
21
17
19
16
25
English
6
5
9
1
2
8
3
10 21
13
20
12
22
11
23
14
26
7