Photonic LED lumiere annulaire 66/40 Mode D'emploi page 3

OPERATING INSTRUCTIONS FOR LED ILLUMINATION UNIT
Please read all the operating instructions before operating the LED illumination unit!
Technical data
Illumination
Diodes
Colour temperature
Dimensions
Attachment
Working distance
Illumination
Diodes
Colour temperature
Dimensions
Attachment
Object holder
Illuminated surface
Illumination
Diodes
Dimensions
Connections
Attachment
Control unit
Supply
Dimensions (D x W x H)
Total of max. single LEDs
Connections
On/Off switch
Segment rotation pushbutton
Potentiometer wheel
ESD connector
Operating ambient temperature
Rel. humidity
Mark of conformity
Control unit
Supply
Dimensions (D x W x H)
Connections
Total of max. single LEDs
ESD connector
Operation
(*) LEDs are suitable for use at temperatures up to 40 °C. However, increasing temperature and humidity results in a reduction in lifetime. For optimal use, the ambient temperature should be 25 °C (or lower)
and the relative humidity 50 % (or lower).
CE Mark of conformity: Certifies that the control unit conforms to the EMC directive 89/336/EEC
LED ringlight 66/40
40 white LEDs
5,000 K
Outer: Ø 94 mm x 25 mm
Inner: Ø 66 mm
Circumferential clamp with spring and screw
55–120 mm, measured from ringlight
LED spot
19 white LEDs
5,000 K
Ø 34 mm x 45 mm
Using spotholder
HiPower spot
1 x HiPower LED
Ø 25 mm x 51 mm
M6 thread for bracket
Standard
24 V DC ± 5 %, hollow plug socket 5.5 x 2.1 mm
250 mA
40
2 x 9-pin miniature DIN socket
–
Approx. 1–25 mA, with index markers
HiPower spot
for max. 2 HiPower spots
5 V DC ± 5 %, hollow plug socket 5.5 x 2.5 mm, 1.2 A
95.5 x 64 x 29 mm
2 x 3.5 mm jack (stereo)
4 mm banana socket
Potentiometer,
Pushbutton for Port1/Port2/ON/OFF with LED display
LED ringlight 66/80
80 white LEDs
5,000 K
Outer: Ø 112 mm x 23,5 mm
Inner: Ø 66 mm
40 –100 mm, measured from ringlight
LED incident light, 2 arms
19 white LEDs per arm
5,000 K
Ø 34 mm x 45 mm,
arm length approx. 480 mm
Using incident light adapter
LED incident light 2 x HiPower spot
2 x HiPower LED
Using incident light adapter
Segment (40 LEDs)
250 mA
95.5 x 64 x 29 mm
40
2 (incl. autorotation)
4 mm banana socket
10– 40 °C (*)
30 –70 %
CE
Combi
for max. 2 HiPower spots and 1 LED ringlight
24 V DC ± 5 %, hollow plug socket 5.5 x 2.1 mm, 0.75 A
126 x 52 x 45 mm
2 x 3.5 mm jack (stereo) and 1 x mini-DIN
40
4 mm banana socket
Potentiometer,
3 pushbuttons with LED display
LED ringlight 38/20
20 white LEDs
5,000 K
Outer: Ø 60 mm x 25 mm
Inner: Ø 38 mm
50 –100 mm, measured from ringlight
LED backlight universal
40 white LEDs
5,500 K
Ø 120 mm x 19 mm
Milk glass, Ø 90 mm
Ø 55 mm
Segment (80 LEDs)
500 mA
80
2 (incl. autorotation)