Team Orion Advantage IQ605 Manuel D'utilisation page 8

 Launching the charge or discharge
Once you are ready to start the charge or discharge, press and hold the START key for three seconds.
The check screen is displayed.
R: 2SER S: 2SER
CONFIRM (ENTER)
R: indicates the cell count detected by the charger
S: indicated the cell count selected by the user.
Warning! If the R and S values are different do not start the charge!
Press the STOP key to go back and check the settings and the battery.
If the values are similar, press the START key to begin the procedure. The charge screen will be
displayed.
Number of cells Charge current
Li2S 5.0A 8.40V
CHG 000:40 00010
Mode Charge time
CHG = normal charge mode
BAL = balance charge mode
FST = fast charge mode
STO = storage charge mode
DSC = discharge mode
While the charger is charging or discharging the battery, by pressing the START key and using the +
and - keys you can modify the actual charge and discharge current. Then, press the START key again.
You can use the + and - keys to change the information displayed on the screen. Please refer to p.12
for information about the various screens available.
8
Battery voltage
Charged capacity
Team Orion Advantage IQ605