Loading The Stored Settings; Error Messages - Team Orion Advantage IQ605 Manuel D'utilisation

To load memorized settings, use the STOP or - keys to select the load data screen and then press
the START key.
PROGRAM SELECT
LOAD DATA
LOAD 01 LiPo
3.7V 5000mAh
The memory slot number blinks, use the - or + keys to select the memory slot you wish to load,
then press and hold START for three seconds. After three seconds the charge screen is displayed
automatically.
The charger can display error messages when certain types of problems are detected. In any case
when an error occurs, check the connections, power supply, battery and settings.
REVERSE POLARITY
This indicates that there is a polarity reversal. Check the battery and connections.
CONNECTION BREAK
This indicates that the connection between the charger and battery was interrupted while the battery
was charging or discharging. Check the battery and connections.
SHORT ERR
This indicates that there is an electrical short-circuit on the charger output. Check the battery and connections.
www.teamorion.com

Loading the stored settings

Error Messages

17