Modifying The Charger's Default Settings - Team Orion Advantage IQ605 Manuel D'utilisation

Capacity Cut-Off
ON 5000mAh
Safety Timer
ON 120min
USB/Temp Cut-Off
USB Enable
Ext. Temp 40C
IN Power Voltage
16.49V
The charger's default settings can be modified. Only modify these settings if you understand their
purpose. To modify the settings, use the STOP or - keys to select the program screen and then press
the START key.
USER SET
PROGRAM- >
LiPO
V.Type 3.7V
From here on you have to use the - and + keys and the START key to select and modify the
settings.
www.teamorion.com
Indicates capacity safety feature setting
Indicates timer safety feature setting
Indicates that the 3-pin output port is in USB mode
Indicates the temperature measured by the probe
Indicates actual power supply voltage

Modifying the charger's default settings.

13