Chauvet Professional EPIX Strip IP 50 Manuel De Référence page 7

Series Attachment Instructions
The EPIX Strip IP 50 can be attached in an end to end formation to create a strip up to 4 meters long from one mounting
point. Do not connect any more than 6 EPIX Strip IP 50 products in a row when hanging vertically.
1. Loosen the 2 fastening eye bolts.
2. Slide the connecting bracket out until it stops and tighten the eye bolt closest to the center of the product.
3. Slide the second EPIX Strip IP 50 into the connecting bracket and tighten the remaining eye bolt.
4. Attach the safety cable as shown in
Install the safety cable last when attaching EPIX Strip IP 50 products in series.
EPIX Strip IP 50 QRG Rev. 2
QUICK REFERENCE GUIDE
Vertical Mounting
1
Instructions.
2
3
EN
6