Parameter's Menu - Watts BT-DRF-02 Guide D'utilisation

Parameter's menu

5
Your thermostat has a parameter's menu, in order to enter
in this menu, press and maintain the edition key ( ) during
5sec. Then parameter menu will appear and first parameter
screen will be displayed
Now you can select a parameter which must be adjusted
with the navigation keys (◄) or (►), once the parameter
chosen, toggle the value with the (OK) key, modify it with (-
) or (+) and confirm your adjustment with (OK).
To leave the parameter menu, choose the parameter
« End » and press (OK).
N°
00
INI: Radio configuration
Sends the radio link signal in order to assign this
RF Thermostat with its RF receiver.
You also need to set simultaneously the receiver in
radio configuration mode (On a simple receiver
press and maintain button until the green light lit's
up, see receiver leaflet)
01
dEG: Unit of the temperatures displayed
°C Celsius
°F Fahrenheit
04
AirC: Calibration of the internal probe
The calibration must be done after 1 day working
with the same setting temperature in accordance
with the following description:
Put a thermometer in the room at 1.5M distance
from the floor (like the thermostat) and check the
real temperature in the room after 1 hour.
When you enter on the calibration parameter "no"
is displayed on the right to indicate no calibration
has made.
Default value & other possibilities
13