Watts BT-DPRF-02 Guide D'utilisation page 29

23 AmbS ---
RecS ---
24
FL.Lo ---
25
26 FL.Hi ---
27 reg ---
Bp1 ---
28
29 Bp2 ---
View of the measured values of the
external (Ambient) sensor.
View of the measured values of the floor
sensor connected to the receiver.
Lower limit of the floor temperature.
Upper limit of the floor temperature.
Selection of regulation type.
Concrete choice.
Floor covering choice.
"no"
The lower limitation is
not used
"no"
The upper limitation is
not used
"bp"
Proportional band
(PWM)
"uf1"
For liquid concrete
with low thickness
< 6cm
"Fl1"
For tiling
29
"__._"
"__._"
From 5°C to "FL.Hi"
From "FL.Lo" to 40°C
"hys"
Hysteresis (On/Off)
"uf2"
For traditional
concrete with
thickness
> 6cm
"Fl2"
For wood parquet
(floating or not)