Bio Green PALMA 2.0 Instructions D'installation Et D'utilisation page 30

Palma 2.0 Bedienungsanleitung / Operating Instructions / Bruksanvisningen
When the desired room temperature is reached then slowly turn the thermostat in an anticlockwise
direction until the operation lamp switches off (10).
Image 10
The heater will now maintain the set temperature by re-starting the heating function when the
room temperature falls below this level. In the event of temperature discrepancies you may need
to adjust this a little.
It is not possible to print a temperature scale
around the thermostat knob because the
heating behavior will differ based on the en-
vironment the Palma 2.0 RAW is used in. For
example the size, insulation, filling level and
location of the greenhouse where the Palma
2.0 RAW is operated in, can make a signifi-
cant difference. This is why it is recommen-
ded
to use use the Palma 2.0 together with the
optional and included Thermo 2 thermostat
as described in chapter 4.3.
30