Palma 2.0 Bedienungsanleitung / Operating Instructions / Bruksanvisningen
4 Use the Palma 2.0 and Palma 2.0 RAW
4.1 General operation
When the desired room temperature is reached, turn the thermostat slowly counterclockwise until
you hear a "click" (10). Due to the bimetal thermostat's measuring tolerance of ± 5 °C, it may be
necessary to check the set temperature with a thermometer and readjust it if necessary. To do this,
turn the thermostat switch in the desired direction (1-10) .
Image 7
Mode of the Palma 2.0
Device not in operation
Air circulation without heating (circulation in constant operation)
2 kW heating output (heating controlled by thermostat, air circulation in constant operation)
28