Bio Green PALMA 2.0 Instructions D'installation Et D'utilisation page 25

Palma 2.0 Bedienungsanleitung / Operating Instructions / Bruksanvisningen
Keep the Palma 2.0 clean and protect it from
heavy soiling and moisture.
As described in the chapter Introduction and
Technical Data on page 3, the Palma 2.0 can be
operated stand-alone (=Palma 2.0 RAW) or with
the included wet room thermostat Thermo 2.
General control elements of the Thermo 2
Heat LED RED
37
However, for precise temperature
regulation and energy saving operation
the use of the Thermo 2 is strongly
recommended.
Mounting hole
Heating and cooling mode
LED YELLOW
Cool LED GREEN
Cool/ Heat mode
ON/ OFF buttons
Display/
Temp indicator
Temperature
selection buttons
Socket e.g. for
direct connection
of the Palma 2.0
Mounting hole
25